help with a mopar

[bwolverton]

I'm considering building a Mopar motor for an A mod but cant seem to find anyone else that has or does. Just trying to get an idea...of what I need to be able to compete with the chevy's and fords.

[dirttrackrocker]

It can be done. A friend of mine is a die hard Mopar man and I run against him weekly in IMCA. He is a top runner here in the Eastern region.

[bwolverton]

any idea what he's running as far as block and different things like that?

[dirttrackrocker]

I'm not a big Mopar guy. I know it's a 340 block. I think the heads are W2 Race Heads.

[racin6mod]

you can put a 4 inch stroke crake in a 360 block and get a 408 cuin motor with a good cam and ported rhs heades 600 hp/500 plus ib-ft of torque. not bad for a mod motor and those rhs heads are cast iron.

[bwolverton]

I was wondering how well one of those would do the 408. But then I went to looking for a cast head and couldnt find anything compareable to a 23 degree head.

[MM90]

I found this for sale on DirtDrivers.com

Mopar X Block- 4 Bolt Main - Bushing in Lifter Bores
Mopar Performance Billet Crank 8 Bolt Flange
Oliver Rods
SRP Pistons
W2 Heads
Ferrea Valves
Erson Roller Rockers
Victor JR Intake with turtle
8 Quart Dirt Track Pan
MSD Billet Distributor with Box and External Coil
Serpintine Water Pump Drive
Rear Mount KSE Pump (fuel and steering) Belt and Mounts
Quarter Master Bell Housing with Starter
Starter Ring and Buttons
2 Sets Headers 1 Set Cross Overs with X Pipe
Motor Mounts
2 Mid Plates (1 for J Car)
Mopar Performance Valve Covers
Barry Grant Silver Claw Carb, Lines, and Log
$6500

[dirty white boy]

get ahold of joey arrington in martinsville va,..thay been envolved with mopars nascar program since the 80s when mopar came back,... http://raceenginesplus.com/bio_joey_arrington.htm

[Mopar 89]

I have a smallblock from Bill Richardson of Ram Racing engines Lynchburg VA. Its a 360 with EQ iron ram heads. Bill is a Mopar only engine builder and in my opinion second to none. I ran 28 races this year and won 8 races and the points. Turned the motor 7500 every race and only changed the oil. Never took the valve cover off or changed spark plugs. Drove a couple of chebby boys nuts.

[bwolverton]

tell me more mopar 89

[dirty white boy]

get ahold of joey arrington in martinsville va,..thay been envolved with mopars nascar program since the 80s when mopar came back,... http://raceenginesplus.com/bio_joey_arrington.htm

joey arringtons motor won the campionship in limited sportsman last year at 311 with 11 wins after the chevys cryed to the point of track adding a 100lbs to the mopar! a .60 360! arrington is up to date with all the race head designs for mopar an has a room of dyno sheets to back up 30 years of mopar circle track motor building

[JC42]

Ram Racing Engines

Here is a link http://www.moparmecca.com/RacersPage.html Just go to Bills Web site and watch the Romespeedway race one youtube and you make up your mind. And I'm with the mopar 89 not being a butthead , We are not going to put alot of motor info up on here. Email me a ph number and well talk. All the youtube video's . http://www.youtube.com/channel/UCm9QciQnTc7Jeq4nNUD-OoA
JC 42