upper balljoints

[frontrunner]

What is the best upper ball joint the howe precision no friction or the afco low friction?? i have both sets that i have ran i really cant fell much diff.. but what does everyone think is the best one or would it make a diff..??? Thanks

[MM90]

I prefer the QA1 low friction ball joints myself.

[frontrunner]

well i bent one of the howe no friction ball joints & i have 2 new afco low friction ball joint & i was just goin to stick them in or would it be better to put the no friction howes back in it??? just did want to buy the howes again if the low friction afcos will be ok. Thanks again

[Confused?]

The big advandtage to the Howes or QA-1s is the different length studs available. If you replace the Howe unit with the AFCO, make sure the studs are the same length.

Forgot to add, with the Howes and QA-1s, all you have to change is the stud. The stud is cheaper than a new AFCO ball joint.

[Flyin Iowan]

ive used afco and howe and would recommend the howe

[frontrunner]

ok thanks again & i just had a brand new set of low friction ball joints that i wasnt using just wondering if there were a problem with using them sence i had them & they are the long thhe same leangth..Thanks again...

[dirtrace09]

Run them since you have them and they are the right ones. They will work for you.

[frontrunner]

Thanks again