Go pro mounts

[Matt Eaton]

What's the best mounts for a go pro camera?

[Sportmod Rookie]

http://www.speedwaymotors.com/GoPro-Camera-Roll-Bar-Mount,36103.html

has decent reviews.

[Matt Eaton]

Should have been more detailed. Mounts other than the actual cheap ones you get with the camera. What's everybody using?

[moose52]

Same question here. I made up an automatic roll off system for my gopro. Currently a prototype but getting ready to cut tooling for the production piece and it would be nice to have a heavier duty roll bar mount. The roll off system is large enough that I use two smaller roll bar mounts. But I had an idea to just make an aluminum version of the gopro roll bar mounts? Figure I could then go back to using just one mount. But would be interested in seeing what others are using. See if anyone was using a ball head mount? Steve

[juice87]

i used some of the stuff that came with it and an old bolt on shock mount.

[crateracer16]

I use the one from speedway. Ran about 25 races last year (on some real rough tracks)and it took a beating but never broke or stretched. I do put a zip tie through the back of the door and zip tie it to the roll cage just incase it did break I wouldn't lose the camera.

[powerslide]

https://www.google.com/shopping/product/4351183982986552899?q=gopro%20roll%20bar%20mount&hl=en&safe=active&gl=us&psj=1&bav=on.2,or.r_gc.r_pw.r_cp.r_qf.&bvm=bv.42661473,d.cGE&biw=1564&bih=793&wrapid=tlif136146139915810&sa=X&ei=t0AmUaCwAaKnigLo64GgAg&ved=0CF4Q8wIwAQ

I have a Contour GPS but that is the mount i bought. Haven't tried it out yet.

[racinjj]

I found a billet aluminum mount on Ebay after breaking two plastic mounts, it is a very solid unit. here it is:
http://www.ebay.com/itm/Billet-alumi...item20c68ab80d

[karter_2_22]

What's the best mounts for a go pro camera?

http://envsystem.com/

Seen a commercial on dirtvisions broadcast.

[Salvin49]

How does the roll bar mount from GoPro work?

[Sportmod Rookie]

How does the roll bar mount from GoPro work?

Thats what speedway sells. I just bought one yesterday and it is GoPro brand.

[racinjj]

The plastic GoPro mount will break and you will loose your camera if its not tethered.

[Sportmod Rookie]

What's the best way to tether the camera then?

[racinjj]

Get an aluminum mount and you wont have to worry about it. I used a tether that I had from and old camera mount, I had my plastic mount break and found my camera up against the wall in turn three after all the races were done.

[bob62]

Just buy a 'Manfrotto 035 Super Clamp' goggle it
They can hold 30lbs.
You will need an attachment so camera can be screwed on in any angle
this clamp is very strong