grt ride height

[fez]

just wondering if anybody knows what left rear ride height would be on 2012 grt mod, i know max with it jacked up is 18. i thought it would help during scaling.

[jurgens22]

There won't really be a set ride height they list for the left rear because it will depend on how much wedge/spring your running. As long as the fronts and RR are good and you have your wedge where you want it then you should be fine. Here is a link to the GRT set-up sheets:

http://teamgrt.com/setup2.html

[fez]

yes i have got that sheet, just curious where everybody ended up?

[BPRC MAN]

yes i have got that sheet, just curious where everybody ended up?

I beileve they are close to peirce car set ups,and with those you set the rr lower link bar at 0 degrees(pretty much normal for all)and left sides set on bit like the post said before which those run 40 to 60 lbs. i almost 100% positive

[fez]

just thought someone could put a tape measure in there and let me know.

[powerslide]

Its usually 1/4-3/4in lower on the LR than the RR. Like the sheet says it all depends on bite

[Rocketman1187]

i have a 2011 and a 2013 grt and the LR ride height should never be lower than the RR. You should have about 35lbs of lr bite at 13.5" distance between upper frame rail and top of rear end axle tube.