Power steering help!!!

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Racer96m
    Senior Member
    • Feb 2008
    • 425
    #16
    Do you know the "T Bar" valving inside the steering box? I had a similar issue with my steering. Very stiff to turn while racing etc. The problem was solved when we changed the box to a .180 T bar valving. We run a 2 to 1 quickner, so that turns the box twice as fast as the stock T bar valving was designed to turn. To make it work you need to lower the T bar valving to .170 - .180 area. I called the guys at PSC Motorsports and they were a big help in solving the problem. You can now spin the wheel with 1 finger. Maybe thats your problem, it was mine.

    Dave
    2012 UMP Stock Car National Champions.
    2013 UMP Modified Rookie of the Year
    2014 Kankakee Speedway UMP Modified Champion
    2016 Fairbury American Legion Speedway UMP Modified Champion
    2016 Kankakee Speedway UMP Modified Champion
    2016 UMP Modified, Northen IL Regional Champion
    2018 UMP Modified, #2 National Points Standings
    Like us on Facebook, https://www.facebook.com/McKinneyMotorsports

      Comment

      • JHobbs26
        Senior Member
        • Aug 2007
        • 146
        #17
        Does it get hard at the end turning both ways or just one?

        GM did make a variable speed box that got faster the last 25% or so of its turn radius, but that is all done with the sector shaft gear.

          Comment

          Previous 1 2 template Next
          Working...
          X