new to QC game and questions ?

[rustymod]

picked up used QC and now have questions always ran Ford 9 inch, so this deal is new to me. first off have to switch tubes...but what axles are needed to make it a 60 inch centered ?

any info is appreciated. thanks

[mudeater18]

Both axles should be 30.5".

[not clamped up]

picked up used QC and now have questions always ran Ford 9 inch, so this deal is new to me. first off have to switch tubes...but what axles are needed to make it a 60 inch centered ?

any info is appreciated. thanks

Make sure you know what the ring and pinion is,486 or 411 it will make a BIG difference on what gear you need.If you have a 9'' with a 650 to be the same with a quickchange with a 411Ring and Pinion you would be close to the 9'' with a 690