KSE tandem pump questions

[blueracer11]

Hey guys, need some help. I just got a used KSE tandem pump, and wondered about rebuilding it. Is it difficult to do, and I need to send it in, or is it pretty simple and I can tackle it myself. I am a pretty good wrench, and have rebuilt a brinn transmission, built my own engines, etc. but have never taken one of these apart. If I need to send it off for rebuild, who does this? Any help is appreciated. Thanks!

[powerslide]

Scribe a line down the sides, besides doing that if you can handle a brinn or engine you will be fine. I didn't know about the making a line so they get put back the same and had to take it apart a couple times b4 I got fuel pressure

[racin6mod]

I've done a few no problem scibe the line and lay everything out as you take it apart watch the thin side the inner rotor is weak and can break just check everything for cracks and scratches. this is way easier than a brinn rebuild.

[blueracer11]

Thanks for the info. Sounds like it's not that bad. I appreciate it.