KSE pump issues...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ZHR41
    Junior Member
    • Sep 2013
    • 4

    #1

    KSE pump issues...

    I am wondering if anyone has had any issues with your steering being hard in corners/ below 5k rpm. My pump is the newest tandom X and 5 races old. Thanks for your time.
  • z40chief
    Member
    • May 2007
    • 90

    #2
    40 tooth gear on pump? That's what most run.

    Comment

    • roger4228
      Member
      • Jun 2007
      • 67

      #3
      40 chief is right I believe kse recommends the 44 tooth but the 40 tooth takes out the tight steering at low rpm

      Comment

      • ZHR41
        Junior Member
        • Sep 2013
        • 4

        #4
        Well I have 24 on the drive side and 48 on the pump side. I also run on of the Gears unlimited falcon trans if that matters? Thanks for the help!

        Comment

        • roger4228
          Member
          • Jun 2007
          • 67

          #5
          most run a 40 pump gear and the 22 drive gear. kse recommends the 44 I would say if you could get to the 44 tooth that would fix you right up

          Comment

          Working...
          X