Tweet
How much do I ream my metric spindles. It's a 2010 lightning with moog k772 balljoints and 1.5 ft per ft reamer?
-
-
Ream the top as shallow as you can, ( just deep enough to get the threads thru the spindle). The bottom is reamed using a 3/4 flat washer as a stop. Put the reamer thru the washer and then in to the spindle. The washer will stop the reamer at the right depth. The lower is a 2" taper and a k6117 ball joint. -
Ream the top as shallow as you can, ( just deep enough to get the threads thru the spindle). The bottom is reamed using a 3/4 flat washer as a stop. Put the reamer thru the washer and then in to the spindle. The washer will stop the reamer at the right depth. The lower is a 2" taper and a k6117 ball joint, if it has nova a arms and cross shaft style upper a arms. If it has the hiem joint style uppers, you will have to call us to get the right stuff. The 2010 cars were built both ways. 606 878-7223Comment
Comment