ford Torino stubbed mod

[Duckhnter83]

Does anyone have any basic setup for Torino stubbed mods? I have a friend who bought 3 wade moon chassis. Looking for ride heights, spring rates, shocks, all and any info you can think of.

[ace1]

I had a '95 Champion Chassis a few years ago that had a Torino stub. I'll see if I can find my notes on it. I think I had a 800 rf, 750 lf, 325 lr, 250 rr. This was with 3 link swing arm, springs on the arm lr, behind axle rr. I set ride height with lower ball joint center line about 1/2 inch higher than inner control arm bolt and rr about 1" higher than front. LR was set by how much bite we wanted.

[sobe92]

Call wade @ Peterson fluid systems