upper a arm question

[Duckhnter83]

My chassis is a old dw7 and has been updated by I'm not sure who so I have a few questions to see if the front upper a arms are right. First it looks like they removed the older style cross shaft style frame mount off for the tubular upper style with no cross shaft. They used what looks like shock mounts to mount the him joints. The rears are lower than the fronts when you look at them horizontaly. This would be adding anti dive correct? Don't you want the front and rear upper arms to remain fairly level looking at the mounting sides? I'm not talking downward angle to the chassis I'm talking front mount sits higher then rear mount. Is there a height the mounting point should be off the frame? Please feel free to share pictures of your front a arms Thanks guys

[Duckhnter83]

No one has a clue? Or can look at there car and see?

[LateModel B23]

I have a DW8 that has tubular uppers with rods ends. They look the be mounted level from front to rear. The front is mounted apprx. 1" from the top of the frame rail and the rear appears to be about 2" from the top of the frame.