Stock Inner Tie Rods.

[rimrider19k]

Does UMP require that you run a stock inner tie rod. Ive now broken 2 inner tie rods on the right front of a chevelle clip shaw car. We run a fast high banked 3/8 mile so its on the right front hard alot. What are my options to add some strength to the corner.

[JustAddDirt]

no, they do not require them.

[Renegade Cust Susp]

Drill the center link and use a him.

[Confused?]

Or a her..... Lol

[drtrkr244]

Is it hitting the frame?

[RRR_Products]

I don't know anyone who uses a female rod end on the inner so I'd use a him. Haha

[rimrider19k]

Yes on hard corner entry it does touch. It seems that it's binding up somehow. And according to Sam at ump " it has to be a stock style". Good old ump gray areas. This is what I was considering. http://www.speedwaymotors.com/AFCO-1...FXMR7AodPXMA2A

[Renegade Cust Susp]

Autocorrect strikes again......

[drtrkr244]

Several companies sell bent steel tubes, just for that issue!