No forward drive

[speedbuggy]

Here's his wheel weights:
LF RF
624 415

LR RR
751 610

Whoops...

For some reason, I was thinking you already said the car weighed 2400. Now I don't see that above anywhere. These weights are calculated for 2400 total weight with those percentages.

If you know your actual total weight, I can adjust the wheel weights for that.

[eclipsegse]

2589 is total weight with driver

[speedbuggy]

2589 is total weight with driver

That makes the wheel weights:
LF RF
673 448

LR RR
810 658

[JustAddDirt]

ditch the huge RF tie-down and go with about half of that amount, and see if it improves. It should greatly

[oldtrackchamp4x]

I think your bars being 3 inches out of alignment may possibly be an issue. Are you sure the car is not to tight on entry, which will hurt exit on a slick track. Maybe go up another 30 lbs on bite, which will give more drive off and loosen entry also. Are you dropping tire pressures when the track is slick? Are you leading or trailing the left rear? And have you talked to your chassis builder about this specific problem? Just some thoughts. JMO

[mudeater18]

What is making the car so heavy? Is there alot of added ballast ?

[powerslide]

Have you seen ruhlman? Haha all in fun, I'm about 240 myself. I think JAD has the best suggestion yet take off the high rebound rf and cut it down to about 6-8 on rebound

[eclipsegse]

How will more Lr loosen entry

[drtrkr244]

Off the gas more lr will loosen entry. You have taken weight off of RR.

[Ruhlman Race Cars]

It's exactly where Brian wants it

Not sure who this is (eclipsegse) or what car you have but the numbers you have posted are NOT what we recommend for our cars.

We offer unlimited tech support to all of our customers so if this is one of our cars, please call us directly at 517-529-4661 9am-9pm and we will make sure you get the correct information.

Brian Ruhlman