pullbar on crate motor

[racindirt8p]

I was seeing everyones thoughts on pull bars short vs long whats the diffrence i can run either one currently running long lookin for input for 602 crate car. Also like some info on the dandy bar thanks

[DirtRacer9x]

Is this for a sport mod or an A mod?

[racindirt8p]

A mod 4link both sides

[UltimateRaceCars]

With a 602 I would just use a long solid bar, some 604 guys are having success with solid links as well. The dandy bars are pretty good as well, I have one on my car.

[racindirt8p]

Ok thanks ultimate for info im leaning towards dandy bar it sounds good wonder if still run 90/10 shock w that setup? Thanks

[UltimateRaceCars]

I dont use a shock with the Dandy bar. I have a few in stock, if you decide to go that route give me a call and I can get you a good deal on one.

[modracer44]

Hate to chime in on another man question, but I'm new to modified racing myself and I have a 4 bar modified with a 602 crate motor. Is a 3 stage afco pull bar setup good for the crate motor or better off with a biscuit bar or solid top link?

[UltimateRaceCars]

From my experience with a 602 crate any type of biscuit or spring bar seemed to delay the torque application too much. The dandy bar acts different than a traditional pull bar setup but I preferred a solid top link with the 602.

[modracer44]

Ok thanks for the info I might give it a try