Tweet
Looking to get more side bite on A40. Running 6 inch split in J bar and 1050 lbs spring in pull bar. Car has good forward traction but lacks side bite from entry into center of corner. Typically run 2.5 to 3 in stagger. As the race goes on I can feel it overheating RR which makes side bite problem worse as race goes on. Any suggestions?
-
-
I would say, lower your J bar equally chassis and pinion, keeping your 6in split. Start with 1/2 in and see how it feels. That wont help your RR heat issue, sounds like you might want to soften that RR spring some. -
1) increase angle in jbar or lower both ends
2) drop right bottom bar
3) stiffen LF spring
4) raise lead on chassis and/or battery/fuel cellComment
-
Post more of your setup and you are gonna get a lot better answers springs shocks z link or not corner weights and percentagesComment
Comment