has any one ran this set up

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • campw
    Senior Member
    • Jul 2007
    • 103

    #1

    has any one ran this set up

    has any one ever ran a straight bar behind rear end instead of a j bar
  • UltimateRaceCars
    Senior Member
    • Jan 2014
    • 116

    #2
    Sportmods use a 23" straight bar on the backside of the rearend, are you inquiring about a short bar?
    www.UltimateRaceCars.com

    Comment

    • campw
      Senior Member
      • Jul 2007
      • 103

      #3
      would that set up be good in a b mod class

      Comment

      • UltimateRaceCars
        Senior Member
        • Jan 2014
        • 116

        #4
        Sure, I have a customer that has an IMCA sportmod and regularly competes and wins against B-mods with J-bars.
        www.UltimateRaceCars.com

        Comment

        • racincowboy3
          Member
          • Nov 2013
          • 32

          #5
          I have a friend in a imca mod on a short track around here that ran a straight bar to the pinion mount under the pinion and had to much forward bite it was unreal... but the track was so small he could get away with it

          Comment

          • racin6mod
            Senior Member
            • Feb 2008
            • 2172

            #6
            this was a common set up once the new ump b mod rules will also mandate this set up as the imca sportsmods do now not sure about usra.

            racincowboy3 I ran that set up with the low straight bar in my limited mod a couple years ago before that track closed and it worked great. tons of forward bite and smooth corner entry.

            Comment

            • campw
              Senior Member
              • Jul 2007
              • 103

              #7
              thanks for all replies this is the 1st time i seen this setup on a modified thanks guy

              Comment

              • Lizardracing
                Senior Member
                • Sep 2009
                • 839

                #8
                The same theories should still apply but an advantage is the mount moves less then when mounted on the front. It's less affected by the throttle and traction.

                Comment

                • 12 Mod
                  Junior Member
                  • Mar 2011
                  • 10

                  #9
                  When running the short straight bar below the pinion, what did you run for split between mounting points?

                  Comment

                  Working...
                  X