Spoiler angle ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • FLYNBRYAN
    Senior Member
    • May 2007
    • 351

    #1

    Spoiler angle ?

    Running mostly on a average length 3/8 dry oval, what is a good spolier angle?
  • Darkstar15
    Member
    • Sep 2007
    • 90

    #2
    Spoiler Angle

    My guess would be 60 to 80 degrees. You might cause a push if there is not enough down force on front though.

    John

    Comment

    • RCJ
      Senior Member
      • Nov 2007
      • 509

      #3
      We run 55degees on our l/m.There is a piont if you stand it up to much the air starts spinning like in the bed of a pickup truck with the tailgate up.If you get some downforce on the tail of a mod it might make it handle worse because there is no downforce on the nose.You can work with springs but if you can stick the nose with downforce it would be better.

      Comment

      • FLYNBRYAN
        Senior Member
        • May 2007
        • 351

        #4
        My previous car had a steep angle on the spoiler, it had a driveable push out of the turns, but sometimes would snap loose without any warning.
        I think on the new car we are gonna startat 40 to 50 deg, also gonna try to if possible build some type of down force in the front.

        Comment

        • ZuricaBlair
          Junior Member
          • Mar 2011
          • 1

          #5
          The spoiler angle is very important in the car for races..!! The average angle is about 50 degree...!!!
          Laundry Room Cabinets

          Comment

          Working...
          X