Wheel off-sets

[Kojak_9x]

Runnin a 4/4 metric clip and lowers. I don't want to keep switchin wheels around when the track changes. The track I will be running the most is hammer down 75% of the time. Slick/rubbered up the other 25%. I was thinking 2" offset on the front and 3's on the rear, anyone see any issues with this.... Or run something simular.

[AdamHammer]

id say pick one offset and use wheel spacers if you need to move the wheels out

[dirttrackrocker]

I would run 2" everywhere but right rear. Put a 4" with a 1" spacer there. If it gets real slick take the spacer out.

[1cln_sdime]

We run 2's all around and somtimes a 3 on the RR in the feature if it slicks off bad