Tweet
street tire street stock class car, been having some ignitions problems at high rpms especally.. wanna put a aftermarket hei distributor in it... any suggestions? i see one that moroso makes with out the vacumme advance? it has a stock elctronic distributor in it now wid the vacumm advance eliminated.. just advice or suggestions...
-
-
we run an MSD Dizzy setup. most reliable we have found. its funny because the guy that we get our motor parts from runs an A-Mod and he is a top points guy every year and he runs the HEI unit that comes on the GM 602-604 Crate Motors. he has never had a problem. only thing he does it but a bronze gear on it. -
The gear is dependent on the type of cam you are running and what it is made out of. The HEI is a good distributor BUT the stock and many stock replacement types do not have an advance stop and at high RPM the timing just keeps advancing.Comment
-
Ego, is this the case with the dizzy that comes on the 602 or 604?Comment
-
The 602 distributor is like that (the 604 does not come with a dist.), that is why many run them locked, well that and you dont have them get stuck and melt the engine. You can lock the advance with a small plate, change the module and coil and you will have a great cheap distributor.Originally posted by rubbinsracin View PostComment
Comment