If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a 9'' floater rear end. Will i need to put in the tube seals in and pack bearings or can i just fill the tubes and pumpkin up to the fill hole for the bearings to get oiled
The point of the R/E grease is to keep the gears lubed. If you try to use oil on the lr and are on a high speed track or a track you are always turning the oil may never make it back over to the LR bearing cause of the g forces.
Tweet
Comment