Tweet
The motor is a 406 w/ 18* heads. The intake has a "turtle" in it. What would be the best or is hard to say without trying both to see if there is anything noticable?
-
-
Lots will depend on whether you need more torque or more topend. -
Lots will depend on whether you need more torque or more topend.
Which gives which ? As always thanks for all the help you give on here.Comment
-
SuperSucker will give you more torque,a 4 hole will give you even more torque and the open spacer will give you more topend.Comment
-
Depends on your engine...When we got our engine, I called and asked the builder, Bill H what would be the best deal and he said with our SB2 engine that a 2" open spacer gave the best numbers on the dyno...It was wanting more open plenum area obviously...Comment
Comment