help? engine builders

[andy16]

gone..............

[perfconn]

Clearances are way to big.You need to select fit the bearings to get. 0025 on the rods and. 003 on the mains or oil pressure will be low.Solve the p/v clearance and piston to head clearance by using a thicker head gasket.Sounds like you need at least. 080 to work.Cometic will make them for you if you can't find any. Lift on cam is not critical.Duration at. 050 is how you make an engine run right.Pistons can be flycut to get more p/v clearance if necessary.

[Rodz]

That's messed up. Be careful. It's things like this that can ruin a good friendship.

[go2fast]

engine

Put in a box and give it back to him you will be better of