Tweet
I'm building a new motor for next season and need some proven combo advise. It's going in a ump mod and only has to be iron block and wet sump. I'm on a very tight budget and need some direction. I already have a nice set of track 1's and was thinking of building a 383 so what are some suggestions? I'm not looking to make 700 horse but I just need something reliable.
-
-
Not a bad combination just be sure you have a good block.If you can afford an aftermarket block build a 406ci with 6.125 rods. -
I also have a good weiand team g or Vic jr intake to use. I'm not set on 383 either if it matters. A good 355 would work I guess.Comment
-
Sell those 2 intakes and buy you an edelbrock 2925.Comment
-
Ok well I've settled on a 383 and would like to keep it some what reliable. Any cam recommendations and carb ideas. The eddy 2925 will be on he top. 11.5 comp on gas. 3/8 high banked dry slick oval.Comment
-
How about a Brodix HV1000 ? I have a similar combo, but that is the intake I have.Originally posted by perfconn View PostComment
-
The HV1000 is a pretty good intake,just not as good as the 2925.The HV1000 has two bad runnners,one on each side that has a bad turn in them.Comment
Comment