Wheeler Tomahawk Block

[dirtdevil]

Anyone used one? Places like Day Motorsports has them for less than $1500 - Ready to assemble. That is like the price price of Dart SHP bare and needing machine shop work.

[sj valley dave]

I would never take one and start assembling it before I took it to a machine shop and have them check everything..I'll bet there will be work that needs to be done...IMO

[CNC BLOCKS]

Anyone used one? Places like Day Motorsports has them for less than $1500 - Ready to assemble. That is like the price price of Dart SHP bare and needing machine shop work.

Those were the blocks PBM was trying to pass off a high nickel or high density blocks those are the Pro Comp chinese blocks.

Here are some links to look over if you have the time.

http://speedtalk.com/forum/viewtopic.php?t=17747

http://speedtalk.com/forum/viewtopic.php?f=1&t=18750

http://speedtalk.com/forum/viewtopic.php?t=17747&postdays=0&postorder=asc&start=0

I sell the SHP block all machined for 1830.00 as that block is my biggest seller.

[LateModel B23]

Is that $1830 a ready to assemble SHP ?

[CNC BLOCKS]

Is that $1830 a ready to assemble SHP ?

Line honed to at least the middle of the spec. or high side

Main housing bores all chamfered

Decked to your demension

Bored if needed

Plate honed using the same hardware and gasket to be used in the end build.

Lifter bores sized to your lifters

Freeze plug holes and cam plug hole chamfered

Cleaned ready to go

[DaveBauerSS6]

Line honed to at least the middle of the spec. or high side

Main housing bores all chamfered

Decked to your demension

Bored if needed

Plate honed using the same hardware and gasket to be used in the end build.

Lifter bores sized to your lifters

Freeze plug holes and cam plug hole chamfered

Cleaned ready to go

When you plate hone with the gasket; is that a used gasket to start with? How do you do it?

[LateModel B23]

CNC Blocks - please check your PM's.

[CNC BLOCKS]

When you plate hone with the gasket; is that a used gasket to start with? How do you do it?

I have about every gasket made for the the SBC and BBC and SBF.