Callies compster or dragon slayer??? QUESTION

[racer21]

Looking for pro's and con's of the two mentioned cranks,im needing to replace a crank and looking at these two, it will a 3.875 stroke motor 6 inch rod je dome piston,going in a
3200 lb car,thanks for your suggestions in advance,if there is other's out there tell me about them

[Dirt Racer]

compstar is an import forging, made to callies specs, machined in USA. The best import cranks out there. Dragon slayer is the next step up, different heat treating than the magnum cranks, magnums being one of the best. if you have the extra money go for the Dragon slayer, if not the compstar will work fine. I sell alot of each one.

[CNC BLOCKS]

I have used both with zero problems, The D/S and the Magnum cranks are made out of the same material but are machined different.

The D/S would be your best bet.

[racer21]

Thanks guys i'm going with the d/s is there anyone out there thats sells a complete rotating assem at reasonable price? Thanks in advance

[fast_crew]

The Comptar Comet cranks, are alot lighter then the D/S, and the sizing is spot on. Between, Competition Products, Race Enginering, Cambell enterprises, you can usually find a deal. Don't waste your money having them balance it for you, get it balanced at a reputable shop yourself.