Tweet
looking for some recommendations on which intake and cam to go with, the motor is a 358
(stock stroke) with bowtie vortec 185cc heads angle milled to 54cc with flat top pistons compstar comet crank 42lb with 6 inch rods, 1.6 rockers and 750 carb looking to turn 7200, was looking at the 2814 or a 2913 but not sure which would work best and need a solid lift flat tappet cam, any help is appreciated
(stock stroke) with bowtie vortec 185cc heads angle milled to 54cc with flat top pistons compstar comet crank 42lb with 6 inch rods, 1.6 rockers and 750 carb looking to turn 7200, was looking at the 2814 or a 2913 but not sure which would work best and need a solid lift flat tappet cam, any help is appreciated