cam shaft info / pure stock.

[turner]

Does anyone have a good cam grind (hydraulic flat tappet) for a street stock . 3200 lbs, hoosier e mods on a 1/4 mile tacky track. (9 . 5 true compression, 487 heads with good valve job(not ported), stock rockers, cast iron 2 barrel intake and rochester big bore carb.I think 1 3/8 x 1 11/16.Have 1 1/2 to 1 5/8 " headers.Not looking for any secrets, but always get good advice on here, so thought i would ask.Thanks for any info.

[usafracer]

Speedway motors has a few. We run the middle of the three they have listed and do very well.