Tweet
Another question for the board: This is the first time I've fooled with dry sump equipment, and my Bert flywheel is the 1 piece ext balance w/Glimer teeth. The only info I have so far is someone that "remembers" the belt they used having a 600 in the number. I am guessing it means 600mm which is 23-5/8" after conversion. Does this sound correct? Thanks!
-
-
It all depends on what your top pulley tooth count is and what mount you are using. Is this an oil pump or fuel/power steering pump or what? I have seen anywhere from a 560mm all the way to 630mm. 580 and 600 are most common I believe. -
I have always used a 24 inch belt - this puts the adjustment in the center of the slots on the pump mount - i hope this helps you out.Comment
-
It's just the oil pump. I'll add the link to the catalog page below. I'll order the 28-tooth pulley (all26420) and 24" belt (all86134). Thanks guys!
Comment
Comment