Tweet
I'm in the middle of building my sport mod motor for next year and have just about everything picked out except for the intake manifold. I was hoping someone here could give me some advice as to what's the best intake available for my application.
Here are the basic rules;
12.5:1
Any steel 23* head
Any sand cast aluminum intake
"stock" 4412
1 2" spacer
My engine build:
12.5:1 355 with RHS Pro Action raised runner heads angle cut to 49cc
The race track I'm going to run on his pretty stop and go so low to mid range tq is what I'm after.
Any thoughts?
Here are the basic rules;
12.5:1
Any steel 23* head
Any sand cast aluminum intake
"stock" 4412
1 2" spacer
My engine build:
12.5:1 355 with RHS Pro Action raised runner heads angle cut to 49cc
The race track I'm going to run on his pretty stop and go so low to mid range tq is what I'm after.
Any thoughts?
Comment