SHP Block

[LateModel B23]

What is good "top end" HP number for a SHP block? Read on a couple of other boards that 650hp is about all they are built for. Over that it is best to go with a Little M.

[let-r-eat]

I would say 750hp in a circle track build is a fair number. They will hold much more in other configurations. Builds over that use the heavier block. There are many putting more on them but I wouldn't.

[runyou-2]

^^^ what he said. I totally agree. My team owner ordered another one today.

[CNC BLOCKS]

This is pushing it a little bit LOL Click on the u tube link

Just completed tuning my 401" sbc twin turbo. Block machine work and rotating assembly was done by Carl at CNC Blocks Northeast. Job well done, I assembled everything to his spec and it went together well.

Heads are Speier Racing V2.72 RHS heads, 245cc. Bauer hyd roller and Pac springs. Straub supplied the Morel lifters. Pulled 7200 rpm but peaks somewhere around 6300, just flatlines all the way out. Big thanks to these fine gentlemen for the fantastic parts and knowledge shared.

Victor E EFI intake ported to match heads by me. FIC 127lb injectors at 40psi base which is something like 103-105 lbs.

Twin T70 turbos, T4 .96 a/r. PTC 4500-ish stall. TH400 trans with CK Performance reverse manual valve body and brake.

straight 93 oct pump gas, intercooled. No meth, no racegas mix, no nothing. Just BP gas station 93 oct gas from 3 days ago

24.5 psi boost.... 1018 uncorrected, 1034 std, 1009 sae

1989 irocz camaro street car on 19" drag radials LOL



1000rwhp Twin turbo Irocz - YouTube

[CNC BLOCKS]

http://speedtalk.com/forum/viewtopic.php?f=1&t=35002

[runyou-2]

that's crankin'er purdy hard.Lol
Nice ride too..

[stockcar5]

Chad builds badass cylinder heads!