break in rockers

[DANNY]

Looking for some break in rockers. I really don't want to pull heads apart to only run outer spring to break in a flat tappet cam.

Pre owned that is

[stock car driver]

What are they worth? I have Harland sharps in 3/8 and 7/16 stud.

[CNC BLOCKS]

What engine Ford or Chevy I have both 1.2 and 1.35 for chevy 7/16 studs and in most cases the heads may have to be machined as the push rod is pushed away from the stud which some times causes clearance issues.

[stock car driver]

Good point on the head clearance. Ive had some motors (oem or eom replacement eq junk) that the pushrod rubbed on the back of the slot or drilled out hole, I used them anyways and figured the rub wasn't enough to increase the pressure at the lifter by much.

[DANNY]

It's for Chevy pro topline head, 7/16 stud.

[DANNY]

If u want to sell shoot me an Email...

Pepe1352@hotmail.com

[DANNY]

Still lookin, figure I try one more time if anyone has any they want to sell before I get new ones...