Tweet
my son is having a 434 engine built and the builder is needing a small base circle cam .
the cam he had in his 415 was 640lift 265,271@.050 and he is not sure if he should get same cam in small base circle.he is guessing rpm 3400-7500 108 centerline. any suggestions 3/8ths dry slick .he turned the 415 about 7200.
the cam he had in his 415 was 640lift 265,271@.050 and he is not sure if he should get same cam in small base circle.he is guessing rpm 3400-7500 108 centerline. any suggestions 3/8ths dry slick .he turned the 415 about 7200.
Comment