Small block chevy oil level height.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Driver50x
    Senior Member
    • Jan 2013
    • 238

    #1

    Small block chevy oil level height.

    Does anyone know how far down the oil level should be below the pan rail? I need to weld a bung on my oil pan to check the oil level. I don't have enough room for a dipstick.it is a first generation engine.
    Last edited by Driver50x; 04-14-2014, 03:14 PM.
  • Krooser
    Senior Member
    • Nov 2012
    • 3117

    #2
    Our Champ pans have a fill plug on the top of the kick out… the level needs to be just below the top of the plug. Yours may be different...
    Member of the Luxemburg Speedway Hall of Fame
    Class of 2019

    Comment

    • Driver50x
      Senior Member
      • Jan 2013
      • 238

      #3
      Would you mind measuring it for me? How many inches down from the oil pan rail is the oil level?

      Comment

      • let-r-eat
        Senior Member
        • May 2007
        • 2319

        #4
        What pan are you using? 7" deep? 7.25" 7.5" or stock?
        BUCKLE UP NOW, YA HEAR?

        Comment

        • Krooser
          Senior Member
          • Nov 2012
          • 3117

          #5
          here's a photo from Champs website… the race engine is 200 miles from me so a photo wasn't possible.
          Attached Files
          Member of the Luxemburg Speedway Hall of Fame
          Class of 2019

          Comment

          • Driver50x
            Senior Member
            • Jan 2013
            • 238

            #6
            The pan is 7.5 inches deep. Moroso part number 21316

            Comment

            • Krooser
              Senior Member
              • Nov 2012
              • 3117

              #7
              I think you'll be OK if the oil level is just at, or slightly below, the bottom of the front part of the pan. Just keep it below the crankshaft.
              Member of the Luxemburg Speedway Hall of Fame
              Class of 2019

              Comment

              • speedbuggy
                Senior Member
                • Feb 2008
                • 259

                #8
                Can't you just put 7-8 quarts (whatever you are running) of water in the pan an measure it?

                Comment

                Working...
                X