Burning Roller Tip Rockers

[dereksehi]

Having a problem burning comp magnum roller tip rockers spring pressure is 130 on the seat and 340 open does anybody have any tricks to keeping these alive?

[35smod]

More oil take the restrictors out if you have them in check to make sure they're oiling good while the engine is running

[dereksehi]

I have had it idling with the valve covers off and there is enough oil to completely fill each rocker

[Lizardracing]

What the weight of the oil and whats the Oil temp?

[dereksehi]

It's 20w50 valvoline vr1 synthetic I don't have an oil temp gauge so not sure on temp

[speedbuggy]

Either install a stud girdle or oil deflector (Speedway Item # 54567700) to get more oil on your balls.

[stock car driver]

do you have restrictors? you cant run them with ball type rockers

[48bad]

Do you have solid or hydraulic lifters?

[dereksehi]

Solid and its restricted with a single .150 restrictor

[dereksehi]

Just thought I would let you guys know we got the issue fixed we welded deflector tabs on the rockers above the oil holes.

[stock car driver]

restrictors are for full roller rockers since they don't need as much oil to cool

[Lizardracing]

They're never "needed" if the block is prepped correctly regardless of lifter or rocker configuration.

[Krooser]

Some guys have fixed this issue by using un-grooved rocker arm balls...

[dereksehi]

We installed them along with welding on the tabs

[stock car driver]

un grooved were worse when I had to run this type