Willys carb?

[Drake Racing]

Have a 750 Willys on IMCA spec late model motor. Carb runs great but
stumbles in corners if track is rough. If track is smooth, no issues, but
if rough in corner it stumbles like its out of fuel then comes alive when car
is driving off.
Curt Drake
IMCA late model #55x

[perfconn]

Lower your float level.

[hucktyson]

You can also lower your fuel pressure

[mod71m]

Fuel pressure needs to be 5.5 to 6 psi for gas carbs. Never more than 6.5.

Lower floats slightly unless they are too high to begin with then just set them correctly. Also If your carb does not have the wedged circle track floats in it then I highly suggest that you call Braswell and buy theirs. They are a much better designed float than the Holley wedged float.