Engine stalled

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • washeduptoo
    Senior Member
    • May 2007
    • 1353

    #1

    Engine stalled

    We got a different engine and it has a little more hp and about the same torque as other engine but the other night, driver got on brakes and engine died. He thinks engine is bogging when on the brakes. Now this engine is on gas while the other engine was alky. I guess we could increase idle or is there something else to look for, engine idles fine. Thanks for any suggestions.
  • washeduptoo
    Senior Member
    • May 2007
    • 1353

    #2
    I guess driver needs to use less brake, have a good one.

    Comment

    • FlatTire
      Senior Member
      • Jul 2007
      • 560

      #3
      turn the idle up 200rpm is what I do when I encounter this.

      Comment

      • washeduptoo
        Senior Member
        • May 2007
        • 1353

        #4
        Thanks for the suggestion.

        Comment

        • Crash 4
          Senior Member
          • Jun 2007
          • 671

          #5
          My guess would be new engine has a lighter rotating mass. Might try less aggressive pads on rear, if turning idle up doesn't work.

          Comment

          • DirtRacer9x
            Senior Member
            • Jul 2014
            • 305

            #6
            Originally posted by Crash 4 View Post
            My guess would be new engine has a lighter rotating mass. Might try less aggressive pads on rear, if turning idle up doesn't work.
            Exactly my thoughts.

            Comment

            • washeduptoo
              Senior Member
              • May 2007
              • 1353

              #7
              They just installed some new rear pads this week, I'm not sure how aggressive they are but we will see how it goes tonight. Thanks

              Comment

              • washeduptoo
                Senior Member
                • May 2007
                • 1353

                #8
                Not sure which one did the job but the increasing the rpm idle and putting new rear pads on did the trick. No problems last night, we got 3rd in that car and won in the other car. Thanks for the help.

                Comment

                • nguyenvinh2
                  Member
                  • Oct 2014
                  • 98

                  #9
                  .................................
                  ban nha quan 2 |nghiệp vụ bảo vệ | cty bảo vệ | chụp hình cưới trọn gói | chup hinh cuoi dep | vay cuoi | sua chua motor dien | sua chua may nen khi

                  Comment

                  Working...
                  X