9.2 or 8.7 deck Ht for Ford 351 modified circle track. (must be 3.5 stroke)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fastford
    Senior Member
    • Dec 2008
    • 4059

    #16
    most 362 rules down here in south east only allow up to 4.060 bore, even if you could go to the 4.125 bore , your back to the weight issue, any of those Siamese blocks are heavy.

    Comment

    • let-r-eat
      Senior Member
      • May 2007
      • 2319

      #17
      The Dart block I built a 363 cubic inch at 8.2 deck weighed 171 pounds. I don't know what a stock block weighs but I wouldn't even build a decent street engine in a stock 302 block. You'll end up with two suitcases.
      BUCKLE UP NOW, YA HEAR?

      Comment

      • fastford
        Senior Member
        • Dec 2008
        • 4059

        #18
        a "stock block" want stand much, but a Mexican block we the mods I mentioned above will. and weighs 125 lbs with the girdle and hard block in it, an early 9.2 r block weighs about the same as that dart block, about 175. if I was not concerned about weight, I had way rather have the 9.2 and longer rod, but its to each there own I guess...

        Comment

        Working...
        X