small late model combo help

[steveshawjr]

Jumping into my first tear in late models. Not looking g for a huge powerhouse of an engine combo .... I have a 30 over 350 with a scat ultra light crank and Oliver 6.25 light weight rods w flat top..... I have a set of wp sportsman 2 heads non ported... looking for some help on witch intake and carb size I should look for ....

[Krooser]

The HP is in the heads and intake. You can run more rpm's if you have a good bottom end.

Seems around here several guys run iron head engines with moderate success... lots of Eagle and Scat components. The top guys are on Brodix heads, aluminum blocks and run 8500 RPM's or more.

No wide bore stuff allowed.

2016 will be my first year in a modern DLM. My engine is a 396 with iron heads. An older build but with lots of good parts. I bought it with two bad rods and a damaged crank... I'll use it because it's what I have in stock.

[save the racers]

2925 Edelbrock intake,750 quick fuel is very good for the price.

[steveshawjr]

Thanks that's the same intake and carb my dad ran with the heads in 2005 just wanted to be sure thanks again