Left lower adjustment

[TwistedFrame21]

When moving the left lower down on the cage to say 5 1/2 from 4 1/2, should you reset your droop load? I made that adjustment tonight and rest it and I couldn’t tell much of a difference

[MasterSbilt_Racer]

Did you maintain your install pin to pin load?

[TwistedFrame21]

I am running a single 100lb spring, static load was the same until I adjusted the droop load which in turn would have altered the static load

[MasterSbilt_Racer]

I am running a single 100lb spring, static load was the same until I adjusted the droop load which in turn would have altered the static load

Ok. That is what I was assuming. Loss of static load is going to be an opposite adjustment compared to the bar change.