New spindles on Rayburn

[SuperEight]

Don't waste your time, I wasted 6 years trying to make it work. You will get close but in the end it is still a car that will not keep up. Times have changed. JMHO

Was it a swing arm car you were working with or 4 link? Just curious as I'm fond of Rayburns and have enjoyed success with them before.

[DGI]

It was a 4 bar car. It had all of the Erb updates on the back. It drove pretty good just a bit free all over.

Huck you know how us racers are... We just can't leave well enough alone. I was just wondering if anyone had tried any different configurations of spindles on the newer Rayburns. I have a few things we're going to try at the next practice day.

[racin6mod]

It's odd to hear guy's wanting to change the frontend of a Rayburn as the list of chassis builder's that got their start buy jigging up or just plain buying Rayburn chassis and modifying them is pretty long. bloomer and Peirce both have said in dirt late model mag. that's what they did.

TOO each his own you gotta do what ever it take!!!

[fastford]

I went through many spindle combinations on Masters, GRT's and Rayburns. That includes different combinations of uppers and lowers plus putting the uppers on slider mounts to dial in and try different roll center theory's on placements. Many of the spindles available are so very similar using them without changing the mounting points on the chassis the change in performance is negligible. I used dozens of combinations of stacked springs and bumps. Like I said before these cars were not bad and in many cases were faster into and thru a corner than all others. We tried many different combinations on the rear of 4 bar cars and even had very good success with a highly modified Rayburn swing arm car. The 4 bar cars were extensively changed with different widths, axle combinations, 4 bar mounting points and bar lengths. I could go on and on. We had solid top 5 cars, but not consistent winning cars doing this until we learned to think differently. As we build chassis and update cars I am not going to spoon feed all my data it took us years to learn but simply said what I said so guys trying this will stop thinking about parts changing and get to tire loading, caster change and camber gain. Read everything ever written on building race cars, there were some brilliant engineers working on this over the past 100 years. JMHO

a hp, you got that new front end you posted a while back ready to go ?

[hpmaster]

a hp, you got that new front end you posted a while back ready to go ?

Yup all done. Engine is back from the shop and we should have car all built in a couple weeks. Working on updating another one and having a different set of spindles made for a third one.