Spring rubbers

[RacerX10]

Yeah I bought it sized for the spring, they fit snug, it's when you get multiple stacked up that touch it wants to kick one out. I have ran a single before without issue but seems the interaction between multiple... Did not know if I was overly worrying about them.

Ah ok. Well that's an easy fix then .. keep an open coil or two between them.

[Rocket0108]

After you get the zipper ties all in try some good ole duck tape it helps keep them secure snd tight

[DEKconsulting]

Yea u need to keep a half a coil open betwwen them

[billetbirdcage]

Zero it's probably the rubbers your using with your band of spring as my guess as for what ever reason they aren't compatible, because I've used something like a 200 to 250 packed completely full of rubbers (8 or so) where there is no coil gap exposed besides just a 1/2 coil at top or bottom and haven't experienced actuality pushing one out the side. I have loaded many all the way to 2800# or more on the smasher and racetrack and while like I have said before they are inconsistent due to not always aligning 100% and will change rates from one cycle to the other, I have never pushed one out.

Now granted on the track it would have a cover on it, which I'd imagine would sort of help that situation so some degree.