2300 hyd cam in solid head?

[Ministock25]

Ok ive heard from a few guys this year that you can run a hydraulic cam in a solid lift head. Any truth to this. I got a solid head with a 510 cam thats to big for our rules. And another head that is cracked. Could I take the followers and cam and throw in the solid?

[14flower]

yes u can u just have to set the lash. run about .010 intake and .012 ex

[Dan32]

Ok ive heard from a few guys this year that you can run a hydraulic cam in a solid lift head. Any truth to this. I got a solid head with a 510 cam thats to big for our rules. And another head that is cracked. Could I take the followers and cam and throw in the solid?

hyd. to solid no ! solid to hyd. yes!! ram speeds are different ! if it works cam want last long hyd. is to soft of metal!

[Ministock25]

Interesting.

[gun91]

Run a racing oil and you'll be fine

[drtlvr]

You can run a hydraulic cam in a solid head. I did it for years. I had .005 lash and it ran great. I never tried a solid running on hydraulic though. I would think the ramp would be different.

[mus06]

soild over hyd head

what does it gain over just run a hyd cam say i am running a 480 hyd head shaved to the may stock valves no port and polish now i put a 480 soild cam in the same head what would make it better then before

[Dan32]

what does it gain over just run a hyd cam say i am running a 480 hyd head shaved to the may stock valves no port and polish now i put a 480 soild cam in the same head what would make it better then before

hyd. cams have diffrent ram speeds than solids the grinds are different!