Bms #728

[langdonracing48]

I bought a 2011 BMS modified, chassis number 728. I was told it was a "challenger", but I've heard from others that they went to just building the dmr cars in 2010? Anybody know anything about these things?

[TS3g]

If the front roll cage down bars are bent and go down to the main frame in one piece, it would be a DMR. They also had cross-shaft mount upper a-arms as well.

The older BMSs before DMRs had split mount adjustable upper a-arms, and the front down bars were in two pieces, split by the cross bar.

There are a lot of other differences as well, but those are easy ones to spot. This is all off of memory from seeing them though, so I may be wrong. I don't remember when they started building them either, but it was the year after Murray drove a Victory

EDIT: I looked at some pictures and Murray had a DMR in 2010, so they were built then

[dirtmod21]

If that is Aj Wards old car that is indeed a challenger. That was purchased originally by Holman. Then Stemler had it before Aj. That is a good car. The dmr cars have dmr welded on the chassis next to the chassis number.

[langdonracing48]

It is aj wards old car.

[langdonracing48]

Is there a way to verify it is a 2011? Does anyone have a number for BMS? I tried getting on there website a while back but it was down. I heard they were sold.

[dirtmod21]

It is in fact a 2011. My old one was chassis 716 and it was built late 2010 but considered an 11. It was the intimadator tho.

[dirtmod21]

Bms has been sold. First Class Chassis by Xtreme are the new owners. Not sure of a number but I know they are still building the BMS with a couple small changes. Best person to deal with for tech support is Joel Smith at Close racing. 8142253250. He has been very helpful for BMS guys in Michigan.

[langdonracing48]

Thank you very much everyone!

[racincowboy3]

Jimmy Reeves is building the BMS cars not at Xtreme in Great Bend, KS. The shop number is (620) 796-2290. He will be able to help you out

[GavinHunyady187]

my 2008 or 2009 was #608 so I think its reasonable that is an 11 or 12, I think I have a setup sheet for it if you need one... but that car was really fast, I wouldnt change a thing.

[langdonracing48]

I drove it a couple of times, it was really unpredictable and hard to drive so i set it on the scales. Had 378# of bite in it lol. Aj sold it to another guy who sold it to me so I'm sure stuff was changed.

[KLAY-DOH]

I just bought what I was told is a 2008 with frame number 538.

[KLAY-DOH]

Any help with set up would be helpful, I'm turning this back to an A-mod from sport mod so bar lengths and such would be helpful!

[langdonracing48]

I don't have the challenger setup sheet but I can forward you the dmr BMS setup sheet if you pm me your email address. Also, Ryan Sebo/Sebo Motorsports is a lot of help with BMS cars. Give him a call at 17017203889 as well as Joel Smith mentioned above.

[KLAY-DOH]

sent PM thanks!