lose on mid/exit

[bluemod]

im loose mid-/exit and i found the reason. i have a 3/4 in trail in the rr. What i was wonding is i dont have a short enough bar to move the rr in where it needs to be so what will happen if i put rounds in the left side bars to compensate for the issue. thanks in advance

[MasterSbilt_Racer]

If you have that much difference in wheelbase length, it isn't terrible. I would cut off the right hand thread end of your tube and tap it deeper. Use kerosene for a lubricant.

[dirttrackrocker]

or just lengthen the LR a little

[bluemod]

I lengthened the lr to make it a 1/4 of an inch diffrence for this week. did i move it to much to start with?

[dirttrackrocker]

Give it a try and see what you think..