If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
after every race take one of the lower bowl bolts out drain the carb , then fill the carb bowls with gas, alky is a very dry fuel, will stick the needle and seats.
i have the same issue with the same carb. the needle and seat need to be specific for alky, this is very important. other than that every couple weeks I take the needle out and clean the area and drench it with WD-40. seems to help
I agree with bob75 alky evaporates and leave that white residue which gums up everything in carb,not to mention the fact if carb is full of gas no need for the ketchup bottle to start it the next time you want to run the motor.
Comment