Brake Bar

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hasben
    Member
    • May 2007
    • 38

    #1

    Brake Bar

    If you are running a short straight pan-hard bar would there be any advantage by putting a brake bar (not a torque arm - 5th coil lift bar) on the car too? Thanks
  • Cheatah19
    Junior Member
    • Dec 2014
    • 5

    #2
    Yes. It will make the car more stable on corner entry. Just check your rules before doing so. Most state that you can only run one torque absorbing device.
    Last edited by Cheatah19; 01-02-2015, 07:10 PM. Reason: Forgot a word

    Comment

    • hasben
      Member
      • May 2007
      • 38

      #3
      This is just an arm with a chain to limit pinion angle and it only works when on brakes. Thanks most inspections around here are pretty lax.

      Comment

      • Cheatah19
        Junior Member
        • Dec 2014
        • 5

        #4
        It will still make entry more stable when used with a pull bar. You have to take the brake bushing off of your pull bar when doing this.

        Comment

        • hasben
          Member
          • May 2007
          • 38

          #5
          Thanks, we will try that.

          Comment

          • washeduptoo
            Senior Member
            • May 2007
            • 1353

            #6
            Why do you take the brake bushing off pull bar? We have run the brake bar but no one told us to remove that bushing? Thanks

            Comment

            • Cheatah19
              Junior Member
              • Dec 2014
              • 5

              #7
              Leaving the brake bushing is defeating the purpose of having the brake bar

              Comment

              • washeduptoo
                Senior Member
                • May 2007
                • 1353

                #8
                Thanks for the information.

                Comment

                Working...
                X