which roller rockers are best?

[stock car driver]

the comp cams ultra pro are right around $300 and look nice.

http://www.compcams.com/ultrapromagnum/

These are what I have on my motors now. They made a improved set to these with the pushrod hole being a steel billet insert or something, mine arent that style.

Ive also ran Harland Sharp, Crane gold and Comp aluminum ones for years and never had a failure.

That said the literature on the comps above makes sense, also the brgs and cross shaft are huge!

[dirty white boy]

If you look at the picture of the single rocker it says it all. At the nose roller there is a crack or at the very least a casting flaw that will be a crack soon enough!
I LOVE that they have a guarantee! Will they replace your engine when one breaks, sticks the valve open and busts the piston at 7000RPM? It will do a lot of good to get a free set of $150 rockers (But I bet they would only replace the broken one) when you have $3000-7000 of engine in a bucket.

idk,..thay just started saleing the stainless,..but ive seen there aluminum's in 3 motors run 2 years no problems,...bow-tie heads flat tops with 630 lift cams in 3000lb cars

[fast_crew]

Look around on ebay for Crower and comp steel rockers, I got a full set of 1.7 comps for $150 and a full set of crower 1.6 for $100

[500BOMBER]

Cant go wrong with Harland Sharps. Good parts for the $.