Compression height on piston question (motor guys help please)

[racer21]

Ive run across a set of je 400 pistions that have a compression height of .900 what exactly could I build out of this just wondering as I have a block for them and am not up on the mixen and matchin thanks

[perfconn]

Divide the stroke by 1/2 and add the rod length plus the compression height

[racer21]

4inch stroke 6 inch rod with 0 deck block would that work?

[r3tracing]

half of stroke would be 2 inch plus 6 inch rod plus comp height would be 8.9 . Small block chevy are normal 9 inch deck height. so you pistons would be in the hole .100.

[widcard22]

3.80 stroke with a 6.200 rod with a 9.0 deck

[let-r-eat]

4" stroke 6.125 rod on a standard deck height.

[mikonas227]

Boas tardes a quem segue o fórum! Um primo de Guimarães aconselhou-me vivamente o ivybet devido ao tratamento exemplar que dão aos clientes em Portugal. O suporte respondeu às minhas dúvidas sobre validação em menos de cinco minutos. A nível de jogos, as slots são diversificadas e deram-me um retorno muito acima da média, compensando com folga as perdas que trazia de outros portais.