Direct drive power glide ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Imcanewb
    Junior Member
    • Jul 2015
    • 5

    #1

    Direct drive power glide ?

    Hi I am new to dirt racing my car came with a direct drive powerglide. With a ball valve can anyone tell me how this works? Or give me any tips with this. I can put in gear and go forward and reverse with valve open. When in track I can drive with it open or closed what is the proper position of the valve when racing
  • noble252
    Junior Member
    • Jul 2014
    • 3

    #2
    the valve is just used to get you going. close it when you are moving, or you will basically be in low all the time. once moving you use the shifter to go from low to high, just like a normal auto trans.
    Last edited by noble252; 07-20-2015, 11:12 AM.

    Comment

    • Fox_hunter42
      Senior Member
      • Jun 2007
      • 570

      #3
      the valve will give u the feeling of a torque convertor. When locked up you will have no slippage in trans. Hit the brake hard motor will kill, cannot start motor if valve in wrong position. I used to leave it open to idle thru pits and onto track, shift to high to start race and ride break to keep rpms up, then just before green flag close valve to get direct drive. It was awesome

      Comment

      • Imcanewb
        Junior Member
        • Jul 2015
        • 5

        #4
        Thanks I was worried it would hurt something if I had it in the wrong position. But what you guys said make sence do I have to worry about opening valve durning race

        Comment

        • Fox_hunter42
          Senior Member
          • Jun 2007
          • 570

          #5
          only if you have to stop or slow way down. If you spin out it will need to be opened to restart and take off. open it after race to drive off track. You will have slippage in high gear under full power if you dont close it

          Comment

          • SRXSRULE
            Senior Member
            • Jan 2011
            • 217

            #6
            Depends on how its built. The PG's ive driven with a valve will not move with the valve open. Start the car with the valve open, put it in gear and then slowly close the valve to take off. The valve worked just like a clutch in a manual trans.

            They make "valve-less" valve bodies for direct drive PG's and they dont cost that much. They bleed off pressure in low gear and then go to full line pressure in high gear. If it was mine I would replace the valve body and get rid of the valve. Eric

            Comment

            • rustYmorRis
              Junior Member
              • Aug 2015
              • 1

              #7
              The direct drive Powerglides started out with a ball valve that operated the valve pressure control from the (not a nice word)(not a nice word)(not a nice word)(not a nice word)pit. This system was eventually replaced with a clutch pedal control, which is still common in many of the modified and late model series.
              http://www.openingtimesuk.com/groups/makro/

              Comment

              Working...
              X