Axel tube lengths

[hunterracing]

Has anyone played with different axel tube lengths for different cars. Like some
Say 33/34 or 33/35 and go to 32/35 or 32/36 and offset it to left more
In car

[MasterSbilt_Racer]

Has anyone played with different axel tube lengths for different cars. Like some
Say 33/34 or 33/35 and go to 32/35 or 32/36 and offset it to left more
In car

Yes. It is a similar result as moving the pullbar on a car that has one. There is also j bar effects, if you don't correct for that. Longer rr tube means less j bar load to rr.

[hunterracing]

Ok I was kinda assuming shorter lr tube would favor lr more but I get what your saying bout longer rr tube

[MasterSbilt_Racer]

Ok I was kinda assuming shorter lr tube would favor lr more but I get what your saying bout longer rr tube

It does favor it for drive off corner.

[over4T]

Also "adjusts" your pinion and driveshaft angles, probably not in a good way.

[keeks]

Also "adjusts" your pinion and driveshaft angles, probably not in a good way.

How does it affect that?

[MasterSbilt_Racer]

Also "adjusts" your pinion and driveshaft angles, probably not in a good way.

How does it affect that?

I disagree about pinion angle, but driveshaft angle, when looking from above, does change.

[fastford]

i guess you could say pinion angle in relation to drive shaft angle and not the ground....jmo...